Whether you are a hobbyist or an experienced carpenter, you cannot argue with the fact that a jointer is an important tool to have in your workshop. This handy tool gives you the ability to flatten or straighten warped pieces of wood.
Furthermore, with a jointer, you can square the edges of oversized or warped lumber. There is obviously a wide range of jointer models out there. But you have landed on this article because you do not want to spend a lot of money on one.
At most, you probably want to spend $500 on a jointer. Question is, are there any good jointers in the under 500$ price point? And the answer is a strong yes. There are plenty of jointers that offer excellent performance at a pocket-friendly price.
So if you are looking for the best Jointer under 500, here I will introduce you to my top 5 picks. Moreover, I will go through some of the reasons why I picked these five.
Comparison table of top five budget jointers
Reviews of The best Jointer under 500 dollers
PORTER-CABLE PC160JT Variable Speed 6" Jointer
The PORTER-CABLE PC160JT Variable Speed 6″ Jointer is one of the best affordable jointers you can buy. It has some excellent features that are sure to delight any carpenter or woodworker. Also, it outperforms some of its pricier competitors.
With a 30 inch long table, it provides enough surface area for most tasks. One surprising thing about this Jointer is the motor. While most in this price point features a 1-1/2 HP motor, this one comes with a 2 Horsepower motor.
So you can expect it to deliver more power than some of its counterparts. The motor itself is a 10 amp motor capable of 6,000 to 11,000 RPMs cutter head speed. You can adjust the speed between 6,000 and 11,000 depending on the task before you.
As with any other jointer in this price range, the cutter head has two knives. These two are capable of landing between 12,000 and 22,000 cuts per minute. The cut depth is the same as that of its competitors standing at 1/8 inches.
why i like this model
It has some plastic parts that I did not like. However, when you look past its few drawbacks, it is a great tool that delivers on all fronts. It is easy to adjust, and its variable cutter head speed allows you to customize it for your different projects.
Delta 6" Bench Top Jointer 37-071
Behind the sleek design of the 6″ Bench Top Jointer 37-071 is a powerful tool that is offered at a small price. It has most of the features you would expect from a jointer in this price category.
Obviously, the most essential component of a jointer is the cutter head. The cutter head on this one has two straight knives. These two knives can cut up to 1/8 inches at 20,000 cuts per minute. Behind its cutting power is the 12 amp motor that gives the cutter head 10,000 RPMs.
The table measures 28-1/2 inches long, which is average for such kind of a jointer. With this table, you can comfortably handle jointing 5-inch long stock. This is sufficient for most of the projects you are likely to handle in your small shop or garage.
A 22-7/8 inches long fence is also available. The fence can be adjusted up to 90 degrees. One thing that I was pleased with was how easy it is to change the fence’s angle. Some jointers in this price range can be challenging to adjust the angle of the fence.
why i like this model
I rank this as the best value Jointer it is well worth its price and is small enough to fit into a small workshop. More importantly, it is a powerful tool that works well in all scenarios. Furthermore, it is well constructed with most of its parts being built of cast iron.
DEWALT Plate Joiner Kit, 6.5-Amp
One of the most popular plate jointers on the market is the Dewalt Plate jointer kit. Given it is from of the most reputed power tool makers out there, its popularity isn’t surprising. However, its brand name isn’t the only reason why it’s popular.
Powering this jointer is a decent 6.5 amp motor that generates 10,000 RPMs at the blade. This is enough to cut through different materials cleanly. It works on both hardwood and softwood. The jointer is powerful enough to cut through PVC material.
When it comes to cutting depth, it has a maximum cutting depth of 20mm. Not too shabby for a budget jointer. With this jointer, you can work with standard biscuit sizes of 0, 10, and 20. It also comes with a fence that is easy to adjust.
This fence has a single design and a non-marring aluminum shoe. With it you can make angular adjustments of 0 to 90 degrees. You can also lock the fence angle into position using a knob. One area where it struggles is in the making of miter biscuits, such as of 135 degrees.
why i like this model
Priced at a very affordable price, it is easy to use jointer that is fit for both beginners and professionals. While its fence does not tilt beyond 90 degrees, this is a small price to pay for what you are getting at its price point. It is by far the best cheap jointer.
Triton TDJ600 Duo Dowelling Jointer 710W
The Triton TDJ600 Duo Doweling Jointer is one of those tools that is often misunderstood. It is common to find negative reviews about this jointer online. So what exactly does it offer, and does it get criticized for the wrong reasons?
Firstly this is a budget tool priced at below $200. Secondly, it’s a double doweling machine meaning it can drill two dowel holes simultaneously. For centering the dowel holes, it is fitted with a rack and pinion system, which works excellent considering the price.
For making an angled joint, the fence can be adjusted from 0 to 90 degrees. It is important to note that most budget jointers have the same fence configuration. The tool also comes with jig teeth for the exact drilling of repetitive holes. With this jointer, you get a dust collection port. The latter can be connected to an external dust extractor for cleaner work area
why i like this model
For the price you are paying, this is a great jointer. It doesn’t have any sophisticated features, which is one of its bestselling points. Overall it’s an easy to use jointer that does what it is meant to do very well.
RIKON Power Tools 20-600H 6" Benchtop Jointer
Compared to other power tool manufacturers, Rikon is not the most well-known brand. However, the company does have a slew of high-quality power tools. One of them being the RIKON Power Tools 20-600H 6″ Benchtop Jointer.
With a 10 amp motor that delivers 20,000 RPM, this is a pretty standard jointer. Nevertheless, it is powerful enough to flatten and square most types of woods used in small workshops. One unique feature of this Jointer is the cutter head.
It boasts of a three-inch helical cutter head with 12 high-speed knife inserts. It has two insert cutters and can handle flattening boards of up to 6 inches in width. As for the cut depth, it stands at ½ inches in a single pass.
Measuring 19 x 9-3/8, this benchtop jointer does not take up a lot of space on your workbench. And apart from being small and compact, it is also very lightweight. It weighs 36 pounds, which is like a feather compared to some of its competitors.
You can check more 6 inch jointers from here – Reviews of the best 6 inch jointer.
why i like this model
This is one of those jointers that deserve more recognition than it gets. If you want a change of things, then this will be a great option. It is not expensive and is lightweight enough for carrying. Also, it has plenty of power to handle almost any task you throw its way.
Shop Fox W1829 Benchtop Jointer
Benchtop jointers can cost a fortune, but not this Shop Fox model. Priced at less than $400, it is quite an affordable jointer for what it offers. This jointer is made from cast iron, so you can expect it to serve you for a very long time.
Being a benchtop jointer, it is more powerful than some of the other smaller options on the list. It comes packed with a 12 amp motor capable of speeds of up to 10,000 RPMs. This is sufficient for most tasks and will help get the work done in less time.
Like most of the other options on the list, the adjustments of the fence stop at 90 degrees. There is a dust collection chute that you can attach to a galvanized trash can. Also, you can adjust the depth of cut to meet your needs. Weighing 80 pounds, it is not a lightweight tool. However, its bulky nature helps it in maintaining stability when in use.
why i like this model
The price you get this for is a bargain when you consider it benefits. Sure it has its fair share of drawbacks, but so do all other tools. It is a great tool to have in your workshop. While it is not a small jointer, it will not take up much space.
How to choose Best a budget jointer under $500
So what features did I picking my top 5 best budget jointers? There are a couple of things always to consider when buying a budget jointer. Here are the main ones.
To be able to straighten anything you need power. That means any jointer you consider for purchase should be powerful enough to meet your needs. Ideally, a power output of 1Horsepower is sufficient for most standard tasks. It is worth noting that the more powerful a jointer is, the more expensive it is.
The bed size
The bed size is how wide a jointer can shave off at a go. For the budget-conscious buyer, I recommend a 6-inch benchtop jointer at the most. This is enough for most of the tasks you are likely to handle.
However, you can opt for an 8-inch jointer if you are working with materials that are more than 6 inches wide. For the most part, though, a 6-inch jointer will suffice.
The cutting depth
How many passes does a jointer have to make before you get a polished finish? This is what is cutting depth it. The deeper the cut depth, the less time you will need on a piece of wood or any other material. For efficiency, this is an essential factor to consider.
Depending on the nature of your work, you may need to look for a portable jointer. If you plan on moving a lot with your jointer, a portable one will be ideal. A 40-pound jointer will be easier to move than a 600 pound one. If you are looking for something portable, then even the best 12-inch jointer will not make much sense.
It is also important to consider how easy it is to adjust the knives. Most budget jointers offer two knives, while more premium models feature four blades. Thus at this price point, a two-knife jointer will be more than capable.
Jointers vs planers, what do you need
What is the difference between a jointer and a planer? This is a question frequently asked by beginner woodworkers. A jointer is a tool used to flatten or straighten warped or twisted wooden boards.
It usually has an infeed and outfeed table. In between then is a cutting head with knives usually two or four. The cutter head is generally flush with the outfeed table.
A planer, on the other hand, is a tool used to make the thickness of a board uniform from end to end. Ordinarily, you have to put a board through a planner after passing it through a jointer.
The tool you buy will depend on what you need. If you are dealing with twisted or warped pieces of wood, the jointer is the tool for you; however, if you have wood that has an uneven thickness get a planer.
Tips on using a jointer
Frequently asked questions
Do jointers have the same number of knives?
No, most budget jointers have two knives. However, high-end jointers can have as much as four knives.
What is a jointer used for?
Jointers are used to flatten or straighten twisted pieces of wood and can also be used to square edges
What size Jointer should I get?
For a small shop, a six-inch jointer will be sufficient for your operations. However, for more demanding jobs you should consider a larger 12-inch jointer
While jointers can be pricey, you do not have to spend more than $500 on one. There are plenty of great options in the under 500 budget category. The five reviewed above offer the best value for money. They are best suited to small workshops and for hobbyists.
Last update on 2021-12-07 / Affiliate links / Images from Amazon Product Advertising API